Softwall Cleanrooms - CZT II
Related Links:
Softwall Cleanrooms
The CZT II softwall cleanroom is specifically designed to meet requirements of a wide range of industries including parts cleaning, electronic, disk drive repair to name a few. The cleanroom is totally freestanding or it can be used in combination with your existing walls and ceiling. The CZT II can be equipped with an internal or external gowning room, pass-thru box, single or double doors. Seismic design is also available.
The self-supporting ceiling system will accommodate either Fan Powered or ducted HEPA or ULPA filters. Fan powered filters are available with duct collar adapters for direct connection to your building HVAC system.
The air passes from your existing environment, through prefilters and final filter then exits the softwall cleanroom through gravity flow dampers. The dampers also act as back-draft and automatically close down, minimizing contamination if there is a power outage.
Frames
- 2” x 2”, min. 16 Ga. Tubular Steel
- Welded Frame System
- Welds ground smooth
- Standard Powdered Coating, high gloss white
Wall Panels Options
- 20 mil, Clear flexible
- 3/16 rigid polyurethane or acrylic
- 3M Dual Loc (part A) attached to each panel.
- 3M Dual Loc (part B) attached to each frame.
- Optional Material, PolyStat, Static Dissipative Vinyl, Low Out-gassing Vinyl, Colored and Filtered Vinyl
Ceiling System
- Structural supports combined with 1½” T-Grid
- Structural steel supports 4’ on center
- Gasketed
- Standard powder coating, white
Lights
- 2x4 fixture
- (4) light tube, 40 watt
- 110V, Universal Ballast
- White
- Explosion Proof available
Fan Powered HEPA or ULPA Filter
- HEPA - Min. Efficiency 99.975% at 0.3 microns
- ULPA - Min. Efficiency 99.999% at 0.12 microns
- 110V - 1.9 amps operating, also available in energy efficient version
- Protective face screen
- Also available 208v, 277v or 230v
- Explosion Proof available
Doors
- 3068 personnel door
- 6068 equipment
- Special door sizes available
Gowning Room
- Internal
- External
- Sized to meet your personnel flow
Pass-Thru
- Sizes start at 12” x 12” x 12”
- Formica over hardboard or SS
Leasing
- Leasing Available
The versatile CZT II softwall cleanroom is a cost effective way to add a cleanroom in spaces with limited room sizes and heights. The system is designed as a single pass air flow system where the air is pulled from ambient, pre and HEPA filtered and returned to ambient through low wall adjustable dampers.
The clear flexible Vinyl panels cannot be penetrated unless physically removed and can be easily replaced if needed.
We offer standard Vinyl’s, static dissipative Vinyl’s, PolyStats that are non-outgassing and carry no static charge and rigid Acrylic or Polycarbonate panels.
The CZT II can be configured in multiple rooms and larger heights than shown.
The CZT II can be easily disassembled and relocated in another area or building.
